Bandit 1200 Rear Maintenance / Nitron OH / Chain DID

 

 
Firmly
 

 
Pulled it tight
 

 
It was stuck with bond, so I went ahead and fixed it in place.
It’s almost flush with the surface, and using a large washer increases the contact area, which should make it less likely to crack.
M5×2 is plenty.
 

 
My hands were dirty, so it warped quite a bit.
This time I used the front OEM rubber, Sunstar in the rear, and the usual DID chain.
Now we’re just waiting on the rear suspension.
Please wait about two more weeks.