This GSF1200 was brought in loaded up from the Izu area.
We’re starting work with all the toppings—the full service.
The Etos stand still isn’t quite doing its job.
Maybe we should add a chain block or winch.
The steering bearing stops with a click right in the middle.
When we took it apart, it was all rusty and crusty.
We swapped in retainer balls and reassembled it with NewTech grease. ★
The seal was catching a bit due to the frame’s paint, so we lightly dressed it first.
Then we reassembled it. ★ Feels really good!
The fork oil isn’t dirty, but when we opened it, it went pssshhh!
We’d like to make it easier to bring to atmospheric pressure going forward.
Rain, rain.
