ZRX1200– tag –

Lately, I've noticed the Kawasaki rate is extremely high, don't you think? Maybe it's because it's May? *No deep meaning intended. The news is dominated by "...

It's cold, isn't it? (*´з`) Well, it's already mid-December. Let's proceed steadily ( *´艸｀) I'm going to use the usual Brembo master conversion adapter.Thi...

He says it's the best with a box attached to the rear! (*´ω｀*) Now then, let's replace the clutch master~ This time we're going with 17φ.16φ won't cut clean...

Lately I've been organizing my backlog. I've been putting off sudden inspections and related maintenance. So with that, I've completed the fluid change ('ω')...

Whoever came up with the bolt-on frame mount kit... amazing... It's well thought out. The frame number clearance is exquisite. Removed the stem. It had plent...

Coken black, swapped to Brembo 40mm calipers. First, I mark the pads: right inner/right outer, left inner/left outer. That way you don't have to write it aga...

Inspection, Brembo caliper, master cylinder replacement, ELF oil change, coolant replacement—we handled it all. First up: oil and filter replacement. This ti...

Unglamorous work. This powder is some of what came out from the brake disc holes. Quite a bit of brake pad dust buildup, you know.   The chain gets a th...

ZRX1200 Deco-mainte request for active throttle installation.   We have to remove the carburetor, so it takes some work. The throttle cable will be our ...

The oil is clean, but time has passed, so I'll go ahead and change it. Operation and condition are both excellent. The bolts are showing rust. Since they're ...