ZRX1200– tag –

It was supposed to be finished today, but while I had ordered the housing (connector), I hadn't arranged for the terminals (spade connectors)… oh well. The c...

We'll set up the battery so it charges quickly. Adjusting the positive and negative cable lengths to match the bike model gives it a clean look. The breather...

I completely forgot about it… Let's install an HIR ignition system. The factory-installed electrical components don't seem to use much double-sided tape or V...

Our shop's recommended chain is DID ZVMX. Of course, other chain makers are wonderful too, but we're captivated by DID's overwhelming stability. Chain fricti...

Well, we ran into a few issues. We'll clean the rear caliper too. We replaced three fluids. The coolant color looks a bit off? I have a bad feeling about thi...

Let's continue with the ZRX1100 maintenance work. We'll do rear maintenance too. The buff swingarm has spots where your hand can't reach to polish. It has a ...

Today we'll service the front end. We'll assess the steering based on its condition. The oil level was good and there was no race damage, so we sealed it wit...

Since it's been a while since this bike has been ridden, let's give it a thorough maintenance. The tires bring back memoriesMETZELER MEZ RENNSPORT The wheels...

   That's a bit tight...    Light and responsive    Nissin 4P is quite a classy choice!    Looks like it might be set...

Well   Oh! The oil level is... 45 mm   The rebound click is barely moving at all... or so it was.   It's pretty well locked up,...