So,
the backstep diagram is hard to see—really hard to see.
It’s on there for now, but
the “frontmost and lowest” position looks like it might hit the muffler when braking,
so I’ll go with a safer spot.
Next
Install this and supposedly you’ll hit over 300 kilometers per hour ★
The instructions say it comes off easily
The English instructions are way easier to understand than the Japanese ones, especially the diagrams.
English with plenty of illustrations is much easier to understand
I made sure it can be easily put back to stock ★
The unit’s 3-pin connector wiring is short,
so in this setup the unit would sit on top of the engine,
and I’m waiting on an extension connector to lengthen it, so this is on hold for now.
Should be done by Wednesday, I think.
