The inspection is complete today, so I’ll check the condition of the bike and plan the work accordingly.
Since the mileage hasn’t advanced much, we’ll focus on the oil systems.
We’ll clean all three calipers, lubricate the pistons, and reassemble them.
The fluid isn’t very dirty, but we’ll replace it all.
We’ll also change the fork oil soon.
There was a slight seep, so we’ll remove and replace just the seal. We don’t usually do this unless the condition is clean, but in this case we can remove the seal without full disassembly.
We always stock them, so we’ll switch to the reliable SKF.
We’ll check it on Wednesday and then we’re done.
