Ebi Hand Riveter H HR005A
Sometimes the riveter just won’t “fit” in there.
Ugh, if only I could crimp this rivet and be done with it… what can I do?
I’ve been in that situation before…
If only I could twist it “vertically” it would fit.
I’ve lived my whole life with just this one riveter (*´ω｀*)
In this state it looks like a standard riveter, but…
actually the head rotates 360 degrees.
You can rotate it with moderate control like this, “twisting” it around.
When the riveter body itself gets in the way and you can’t crimp, it’s a “handy tool”
The trick is that it becomes vertical!
When you need to crimp rivets deep inside a box, you absolutely need this.
You can now work in places where you couldn’t before.
It’s truly a useful item.
Rivet diameter compatible with 2.4/3.2/4.0/4.8
So you won’t run into problems.
Normal use is about 80-104mm
Vertical use is about 95mm
When you’re working on various projects, there are always those moments when…
“If I had this, I wouldn’t have to remove so many parts” or
“I had to resort to bolts and nuts instead” or things like that.
Whether you have the right tool or not makes a difference in “saving time” and “working efficiently,” I think.
The hardest part is not being able to buy it when you absolutely need it.
