It seems like it’s almost done but never quite finishes
“Oh”
This part is missing…
Little collars with flanges and such
It’s cheaper to buy than to make (*´ω｀*)
I’ll keep plugging away at it~
The grips that were brought in are too long
As far as I know about motorcycle grips
“115/120/125mm”
Short ones are like capris
Long ones are like bootcut jeans.
Why not just cut them?
Strangely, that doesn’t work in the real world.
47X-26241-00
47X-26242-00
Yamaha genuine TZ type still available
The ETC mounted in the work flow path
is unfortunate
Please change it
There are no bosses (threads) at all.
Double-sided tape attack is the only option left?
I was about to give up…
Holes… holes… holes?
I have a feeling a well nut might fit
Perfect! Spot on size!
Once the mounting holes and threads are decided, it goes fast
It was able to be mounted perfectly like this.
If it goes any further forward
it will contact the screen.
TZR models are subtly tight, aren’t they
I painted it with gun coat and installed it
Using a cover-type
“shape memory type sleeve”
to protect it.
The appearance is clean and beautiful.
Even for gel tube fans
I’d like them to try this material
I’m going to make a master tank bracket
Lately
I’m too lazy to look at the lathe dial (markings)
Using a dial gauge
to make it semi-digital counter-like
and taking it a bit easier.
That’s how it turned out.
Probably more time thinking about it
than actually making it
Trying to avoid failures as much as possible
while also thinking about recovery options
That’s how it ended up.
The master side nipple is 90 degrees
pointing up. This is unexpectedly tricky.
Can’t mount it lower than the image
And if I move it closer to the master clamp
it contacts the cowl bracket
Hoping for a bigger tank.
The position is determined by elimination (*´ω｀*)
Whether the gauge visibility is good
when sitting on it
is really important.
I also made the position light LED.
The connector is also 110 type
Now I can work with one hand
These kinds of small details
will definitely pay off later.
Make it a habit to open the radiator cap
Since it just unscrews, whenever you have time
it’s good to check it
The dots might hurt?
There’s a possibility
so I made them ultra-low profile.
That’s how it turned out nice and clean (*´ω｀*)
Turn signal damper collar
is missing, so waiting for parts
Almost complete ♪
Looking at it, racer replicas really are nice.
ポチップ
It’s really great for polishing the screen
