Kawasaki OEM | 30A 250 Connector Damper Fixed Starter Relay | ¥10,430 | 27010-0796

This is, in a sense, a rare OEM part.
The wiring connector is 250-type and non-waterproof, with no special terminal shape.
It was used on slightly older bikes.
*Such as the ZZR1100

Choose a starter relay with a 30A fuse.
Having a 30A fuse in the position closest to the battery makes a huge difference in safety.

By the way, without this 30A fuse,
the section from the battery to the fuse box is unprotected.
If the battery positive wiring shorts, current will keep flowing until the battery is drained—which means a high risk of fire.

Especially on motorcycles called classics, the starter relay doesn’t have
this fuse, so adapting one like this really boosts your safety margin.

The 250-type terminals:
top left and right are ground and starter ON 12V.
Bottom left and right are constant 12V (BT+),
which means main harness power supply and can also connect to a D-UNIT or direct-to-battery relay.
Just using a starter relay like this raises safety and makes it much easier to tap constant power for direct-to-battery wiring—your battery terminal stays clean.

The terminals accept standard ring terminals in M6 size.
This is really important—nowadays many relays have narrow, oddly shaped terminals or stoppers to prevent rotation, making them special.
A model that works with common off-the-shelf terminals is extremely rare.

Kawasaki OEM | 30A 250 Connector Damper Fixed Starter Relay | ¥10,430 | 27010-0796

You can find things like this on Amazon, but since this is a super critical spot…

https://amzn.to/4iB3UfE

  • Copied the URL !