

The base body and dial gauge tip are included.
The pressure relief holes are properly drilled in two places.

I should mention this upfront.
The plating probably made it too thick to screw into the plug hole by hand.
I bought an M14-1.25 die and managed to make it work, but…
That’s pretty risky, isn’t it?
(STRAIGHT) HSS Die M14×1.25 18-8142
A Straight die is plenty—even factoring in shipping, it’s reasonable.




Here’s what the size looks like.

An 8 mm dial gauge from Mitutoyo or similar fits in nicely.


When mounted on a Z1R, it looks like this.
With a tool like this, setup and measurement go faster.
It also cuts down on guesswork, so give it a try.
Yamaha OEM Dial Gauge Stand B Plug | 90890-01256 | ¥2,520 | Also ideal for Kawasaki Z and GS models
