
Well, we’re almost done and all that’s left is the vehicle inspection.
So let’s go grab some lunch!
Let’s start by checking the tires and wheels.


It’s reassuring to do a thorough check around the whole tire to make sure nothing is stuck in it.
Most people don’t check the tire surface, so take a good look at it.

Let’s check the tire manufacturing date. It’s 0522, which means week 5 of 2022.
Since most people don’t ride much, only the years pass by.


Let’s check the runout of the tires and wheels.
Sometimes people unknowingly bend their wheels, so it’s a quick check.
Of course, there were no issues.

When removing wheels, it’s best to put a cover on them.
It takes just a moment to scratch them, but putting on a wheel cover only takes about 15 seconds.
Reducing those awkward silent moments makes the work more enjoyable.
I’ll skip listing everything since there’s too much to cover.









Since we haven’t gone very far since last time, the condition was good.
There was some mysterious mold, but I cleaned it up pretty well.
All that’s left is to get the vehicle inspection and take it for a test drive to complete it.
