“Safe Grass Cutting” – Simple Design Reduces Risk! One Second of Carelessness, a Lifetime of Injury. Please be careful.

Blog posts about grass cutting get an incredible amount of traffic.
Earn when you can earn – that’s the Solomon way?

When you watch someone grass cutting, it looks deceptively simple.
However, to master it, you need tricks and experience and considerable focus and attention is required.
By the way, fatal accidents and finger amputations happen regularly every year.

If you take it lightly and use it in a T-shirt, shorts, and beach sandals you’ll be done for in an instant.
Since it’s tiring work, I think a simple design is best.

If you’re using a grass trimmer for the first time, skip the chip saw

When you purchase a grass trimmer, a chip saw typically comes included I think.
As you can see, it’s a powerful-looking attachment with sharp, jagged blades around the outer edge .

In terms of use, it’s the strongest and a versatile tool that can both cut and trim grass at the same time .
However, if you don’t concentrate and pay attention while using it, it’s an extremely dangerous blade .

With rotating tools, when the blade catches, a phenomenon called kickback occurs.
Simply put, the spinning tip gets pulled and flies away .
If it hits someone nearby, it will naturally cut them deeply . In the worst case, if it bounces back at you, it will also cut you deeply .
Grass trimmer accidents – if you think of it like a razor, you’re in for a world of hurt.

Also, chip saws shouldn’t contact hard objects or things that catch easily .
Even if you know that, stones can fall in overgrown grass and tree stumps can be present.
Experienced people can handle it, but if you’re using it for the first time, you won’t know what might happen.
Keep that in mind and enjoy grass cutting safely.

Makita’s resin blade – very handy and safe A-68323

By the way, I’ve never actually used a chip saw blade. I initially used this resin blade.
The teeth open from centrifugal force to cut weeds – that kind of thing.

While the resin blade has lower durability, it has surprising cutting power , and the safety of easy use is guaranteed.
Kickback is virtually non-existent so you can use it with peace of mind and enjoy yourself.

Nylon cord is hugely popular these days – lots of manufacturers make it.

Nylon cutter Sho-Raku (tap-out auto-feed type) is what it’s called.
It wasn’t expensive, so I bought one but never ended up using it .

When you cut grass with nylon cord, it wears down and breaks, getting shorter and shorter.
To release the shortened nylon, you tap it on the ground while rotating, and out comes the nylon – a clever device .

It seemed very convenient, but once you take it apart, reassembly requires some skill.
Also, when it gets scratched or worn from use, I wondered if it would really disassemble the same way and never used it.
Some experts wrap cable ties around it instead, so in the end anything works.

The final destination is Oregon JetFit

Depending on the season, it’s completely unavailable
Oregon JetFit, a nylon cord-specific attachment .

It can only be used with high-output grass trimmers, but it has an excellent design.
Nylon cord replacement is very efficient – just pull out the old one and insert the new one.

The inside has a ratchet that’s one-way so you can’t pull it back out – that’s the structure .
Even as the cord wears down, you can just pull and insert to recharge , and with its simple design, it’s unlikely to break – I think it’s an attachment you can trust completely.

Nylon cord is sold on reels, so you can cut it to whatever length you want.

Obviously, if the length isn’t realistic, the centrifugal force can break the head or cause other problems,
so please use a realistic length.

Like this, you can insert and determine the length or you can pre-measure with a tape measure and cut it .
Tool-free, easy replacement is extremely important.

Since grass cutting is basically very tiring, it’s best to minimize hassle.
After you’re done, cleanup is also easy thanks to the simple design.

Darwin Grip (Grass Cutting Assist Bar)

Cheap knockoffs are also available on Amazon. Whether you use this or not makes a huge difference.
Being able to adjust the handle position (position setting) is extremely important.
Since grass cutting is basically exercise, it’s best to do it with minimal strain on your body.

You won’t always be working on flat ground.

Just having the handle positioned higher makes a huge difference in efficiency.

With the standard D-handle, your posture inevitably leans forward and your back hurts.
The operation issue is that U-handles and similar can’t be used.
Basically, you have to choose between a D-handle or this kind of assist.
Working as comfortably as possible helps prevent fatigue and back pain.

I bet many of you have to do grass cutting when you go home for summer break.
First and foremost, avoiding injury and working comfortably are what matter.
Please use this as a reference