Wow! (*´з`) Didn’t realize 15 or 16 years had gone by!
Carburetors are becoming a dead word these days, aren’t they? What do you think?
Exhaust noise measured at 94 dB – most bikes fail on this, so watch out.
This one’s out too ( ；∀；)
Yeah, it’s pretty scorched! (*´з`)
Air-cooled carb bikes are fun to work on when it comes to spark plug replacement.
I like a standard JR8B plug (*’▽’)
Time to replace the air filter!
We’re going to do an OH on the brake master (‘ω’)ノ
Back in the day, you’d install this cup separately yourself, right?
Times have changed. Now we just do an inspection, and we’re grateful for that.
Looks like there’s no problem……
Inspection drill for the master return port.
We’re not digging around – just doing a visual check of the passage.
Even blowing with air or parts cleaner can be iffy sometimes.
Since it’s less than 0.5 mm, you really should check it carefully.
We’re not removing the bottom, so we’re doing it thoroughly from the top (*’▽’)
It’s a vacuum~
It should be holding tight now.
DIY replacement but worried about it?
Well, it’s probably fine, but since you were concerned, I took everything apart and checked it all.
It should be good…… and we’re done!
