GSX1100S Nioro-Nioro

Well
 

 
We’re going to replace the tank.
Since a Pingel is installed, we’ll make a gasket.
A seal punch comes in handy for all sorts of things★Of course, “Made in JAPAN”
 

 
We grind down the tank with a rotary tool and blow away the debris
We also use non-drying 1102 to secure it
 

 
The switch flies off—a real blast that leaves the bolt behind
We’re good at removing it with a punch and chisel★
Customer-supplied parts have been replaced
We’re currently repairing the silencer over here~