It’s already July, even though we started back in January.
Time really flies…
The delay isn’t my fault, I promise.
Anyway,
I did some front maintenance and disassembled it to check things out.
The shaft play I was worried about turned out to be fine,
so I was relieved and replaced the bearings, and the front end assembly is now complete.
After that, I also replaced the intake manifold and air cleaner joint,
and that’s where we are now.
We’re almost there, but other things have been taking my attention,
so it’s slow going. The plan is to finish this week,
though delivery is definitely not happening…
Umao
