Everyday Events (Work Log)– category –

Let's check the front fork. This is a fork type without metal. The bottom case lower side wears barrel-shaped and can develop symptoms close to steering play...

With an old machine like this, you never know what might have happened in the past, so let's check carefully and proceed. The lower side is a bit rough. I im...

Parts are gradually coming in, so today we'll work on the front area. Since we'll be disassembling the caliper, it's easier to loosen things beforehand, but ...

Inazuma 1200 Always in beautiful and reliable condition. The customer requested a Sunstar campaign kit, brake maintenance, and harness replacement. The Sunst...

Let's work on the fine details when it rains. The switch worked fine too. I just realized the mirror holder is missing. For now, this is ready to start. &nbs...

It's a rainy weekend. I'd like to send it out for frame straightening sometime next week. With this slider in place, the engine is safe. On bikes like the GS...

Let's fix the dent in the swingarm. The ribs are standing up, so it's been difficult to sand it down properly. We'll replace the head cover, but I suggested ...

We'll work on corrections to the right side. Since we don't have just the right attachment, we'll machine an M16×P1.25 thread into steel to make one.   ...

The other day it came in running on barely two cylinders in the remaining snow. Since the engine and carburetor are well maintained, we suspect an electrical...

Let's perform a cam chain inspection and valve adjustment. Unfortunately, it was seized.   As expected, the intake side was in tighter condition.  ...