So the meter we installed the other day developed a problem, so we’re replacing it. Same-day completion, as promised.
I thought this would be done in no time! But it turned out to be surprisingly complicated.
This is an all-in-one type meter.
This mini regulator is a countermeasure part, apparently.
The wiring diagram calls for a five-pole relay, so it’s necessary.
I have four-pole relays on hand, but no five-pole ones, so I had to dash over to Bax by car!
I found a good spot in the back, laid out the relay, and ran the wiring forward.
Since I’m installing it with removal in mind, the planning takes quite a bit of time.
Oil change is done, and we’re finished.
