Let’s take measurements when installing the Okada Projects unit. Since it’s noisy at night, we do the measurement check in the morning.
We measure every time, but this might be the first time we’ve posted about it.
The ammeter is a modified MUJI unit. Less than 2A per coil. The fuse blows at 5A, so if it doesn’t meet the requirement, we can’t install the V+ unit.
Switching allows settings of 16.5V or 15.5V.
We can’t see the fine details on ours, but it seems the key is how smoothly and stably it boosts the voltage.
Before installing the plasma booster. There’s much more flickering and noise than this display shows.
After installing the plasma booster. The waveform is solid and the flickering is completely gone. We confirmed that it’s working properly by comparing before and after.
Modified MUJI unit. It’s subtly lightweight, simple, and compact—quite handy. It’s sufficient for basic measurements.
We keep it so anyone can use it anytime.
We also made an attachment and can store it inside—a nice side benefit.
The ignition product is working perfectly.
