Is it new? Full-fairing bikes require getting used to and remembering the service procedures every time.
First, we have to remove the fairing… ( ﾟДﾟ)
First, we’ll replace the coolant (*^-^*)
It was in good condition.
Since some time has passed, we’ll replace the cap as well.
At the same time, we’ll drain the engine oil.
We’re using Shell Advance Ultra 10W-40 for the engine oil.
We replaced the brake fluid on all three calipers.
We’ll replace all the bleeder caps.
The clutch operation is abnormally stiff, so we tried lubricating it with Triflow from above and below… but it didn’t improve at all.
With that grinding feeling, it’s probably going to break, so we decided to replace it.
We’re waiting for the clutch cable (*^-^*)
