Hivisibility Mirror™ Z2 Monster Mirror
Black/Chrome Plated
- Ultra-Thick 12mm Rod
- R1000 Wide-Angle Mirror
- Weight Built Into Mirror
- Choose from 3 Types of Rods
- Choose Black/Chrome Plated
- Choose New Safety Standard Compliance or Non-Compliance
“Ultra-Thick 12mm” “With Weight”
Reduces Vibration Too
There are quite a few options to choose from
but it’s a must-see~
Order early before stock runs out
First, about the rear-view mirror
“New Safety Standard Compliance”What’s that??
Vehicles manufactured on or after January 1, 2007 must comply with safety standards.
Vehicles manufactured by January 31, 2006 are not subject to the safety standards.
In other words
bikes like the ones we have here are OK
This time, you can choose whether this mirror complies with the standards or not.
It’s easy to check by looking at the red circles
For bikes from 2007 onwards
choose the one with “impact damping device”
*Water-cooled Z900RS requires it
3 Different Angles
It’s like a spot-the-difference puzzle, so look carefully.
Daytona Hivisibility Mirror
Left/Right Common 10mm Positive Thread
Z2 Monster Mirror Short/Black 41561
First, Short
Daytona Hivisibility Mirror
Common 10mm Positive Thread Z2 Monster Mirror High/Black 37362
Next, High
Daytona Hivisibility Mirror
10mm Positive Thread Z2 Monster Mirror
Low/Black 37360
Finally, Low
It’s a spot-the-difference puzzle…
When it comes to Z2 mirrors
Daytona is the name!
Maybe we’re in that era now.
ポチップ
ポチップ
ポチップ
