It’s not a big deal, but it definitely makes things more convenient! ♪
Makita A-76146
Ground Trimmer Attachment EN424MP
Supply has finally started.
Get it before it runs out again!
This is an attachment you should definitely have.
As I posted the other day,
this “little extra effort” tip
makes things more convenient and looks better too.
Today I’ll share
an example of what I did with the ground trimmer. ♪
ポチップ
Now,
adjusting the front-to-back position of this wheel
requires a tool.
You often want to adjust the cutting height during work,
right?
It’s a hassle to go get the tool every time.
Even if you keep it in your pocket, you have to
take off your gloves.
This is definitely a place that should have a lever.
It really improves convenience.
Nabbey Bitekku (NBK)
Mini Clamp Lever (Male Thread) –
Flat Type L-Shaped LHCM Series
Mounting hole diameter M5mm, mounting length 32mm
LHCM-5-32-BK
This one is 32mm, longer than the previous one.
You need to insert a spacer
or it won’t tighten properly, so be careful.
Since we’re working with plastic, approximate dimensions are fine.
Hole diameter 5φ
Width 10mm
Outer diameter around 12mm should work.
Honestly, since we’re just tightening,
almost anything works.
Now you can lock it freely! ♪
Small position adjustments become much easier.
And the important thing is the lever position…
The center button makes it free-moving! ♪
With this feature, you can adjust the lever position freely
and easily! ♪
These little things
will definitely increase your attachment to your tools~(*´ω｀*)
ポチップ
