Yamaha genuine part.
- Looks great on the Naked. Short arm mirror
- The body can be used on both sides
- No vibration, easy to see, easy to adjust, easy to obtain
- Size is M10 right-hand thread
What’s important is “visibility, low vibration, and design”
Despite being such a short arm, you can still confirm the rear view clearly.
If you can easily check “inattentive driving is reduced”
from behind “aggressive driving and police enforcement” you can notice early.
I used to think that the smaller the mirror, the cooler it looked
but as I seek various safety and convenience features
I end up gravitating toward the genuine mirror.
Depending on the model year, the mirror surface area is checked during vehicle inspection, so please be careful.
The arm length is approximately 55mm.
Adjustment can be done up and down with the arm nut. (Hidden by the boot)
However, recently I apply thread locker to the mirror side (upper side) to fix it ,
and adjust only the lower side .
Just doing this suddenly improves convenience.
The adjustment on the mounting side is free, so “please adjust by turning clockwise”
* Turning in the opposite direction may loosen the mounting so when adjusting, please turn clockwise
The genuine mirror is designed to be easy to adjust like this, which is wonderful.
I use this mirror on my GS1000S, Inazuma 1200, and Zephyr 550.
ポチップ
The article was not found.
