

I was looking for a clutch wire to adapt to the GS1000S (preferably low-friction).
Advantage Super Low-Friction SUS clutch wire 582-S11
What I needed to know when adapting it was the outer length.
Once you have that, you can do a rough layout check using hose of a similar size.

I lined up hose of a similar size with the end

and roughly traced it all the way to the end with masking tape.

This method is more reliable than measuring straight off with a meter.
When you don’t want to mess up a wire purchase, definitely try this approach!
The outer length came out to 1160 mm.


Since the original was pretty rough, it got a lot lighter.
A short wire won’t reach, and a long one gets heavy (and stiff), so being able to pick the right length makes the operation much easier.
