Honda OEM | Mini Blade 6-Circuit Fuse Box | 38200-KFG-010 | ¥4,230

An unusual separate-circuit mini fuse box used in Honda scooters and similar models.
Usually it’s built into the main harness, right?

Roughly 48 × 29 mm in height and width.

Since it’s a repurposed base, the connectors from the 250 (4-circuit) and 110 (6-circuit) can be reused as-is or reconfigured.

The terminals come out easily.
Watch out—there are single and twin types.

It’s held in place by just the center lock,
so you can release it with even a thin flathead screwdriver.

This is what it looks like when removed.
You can see the difference between single and twin types pretty clearly.
If you want three circuits, bypass the single and twin with wiring.

Terminals are available from Haisen Komu.

● Sumitomo Wiring Systems Mini Blade Fuse F Terminal Dual Type
(for 3.0–5.0 mm² wire) / F-FUSE-1234


●
Yazaki Mini Blade Fuse F Terminal / F-FUSE-MN-8851

P-TOUCH 24 mm width tape for printing.
Since 24 mm is a bit wide, trim it to size with scissors as needed.

The standard fuse box mounting method uses a claw-lock type.
Since making that shape is a hassle, I cut it with nippers, finish it with a belt sander, and secure the bracket with Megmix.

株式会社ヒロチー商事 楽天市場店
¥4,653 (2026/09/21 08:35時点 | 楽天市場調べ)
  • Copied the URL !