KITACO | X-ADV (RH21) | 756-9000100 | Power Harness – Relay Trigger

KITACO | X-ADV (RH21) | 756-9000100 | Power Harness – Relay Trigger
Adapted from another model for use on the X-ADV (RH21).
The connector is located behind the left rear cowl, where there’s a blind connector you plug it into.

A word of caution, though.
You can get “ON 12V / constant 12V / ground” from it, but—
the wiring is thin, apparently 0.5 sq mm or less, so “drawing power from here is a no-go.”
If you plug a power-draw relay like a D-UNIT straight into it and use it that way, you’ll have serious trouble, so be careful.

I use it just to draw the ON 12V needed to trigger the D-UNIT relay.
*The advantage is you can proceed without modifying the bike’s wiring.

KITACO | X-ADV (RH21) | 756-9000100 | Power Harness – Relay Trigger

Inside the black boot is a blind connector.
Just remove the blind cover and plug it in.
I think this part was originally meant to be spliced in.
Well, it’s an adaptation, so

KITACO | X-ADV (RH21) | 756-9000100 | Power Harness – Relay Trigger

  • Copied the URL !