We’re currently implementing earthquake preparedness measures. I’ve paused work temporarily to carry out these earthquake safety measures. “You never know when an earthquake will strike, right?” “The regret of not taking earthquake precautions would definitely be far greater.” That’s what I think.
When storing a motorcycle on its center stand, you sometimes wish you could “get it closer to the wall,” right? Nowadays you can purchase a tool like this for under 7,000 yen… it’s amazing. I immediately ordered one to try it out.
Featured Item: Center Stand Mover (Center Stand Motorcycle Dolly)
Current Status: Shops are experiencing sellouts and backorders, making this a highly sought-after item that’s flying off shelves.
What Can It Do?: Simply place your motorcycle’s center stand on this plate, and you can move the bike in any direction with minimal effort, rotating a full 360 degrees.
Greatest Benefit: What would normally be absolutely impossible—sliding your motorcycle sideways to park it flush against the wall—becomes possible! It completely eliminates dead space in your garage and dramatically improves space efficiency.
Decoboco’s Other Blog. “RURAL GARAGE ”
A hidden room for non-motorcycle topics. I share convenient everyday items, relocation experiences, delicious food, life philosophy and more. ←click
It must be an offset-type design that clears the center stand bar. There are cheaper motorcycle dollies (center stand dollies) available, so be careful.
Because it’s offset, you have more freedom in where you place it on the plate.
The ribs are well-formed and create a sturdy finish. This is a very reassuring feature.
The weight of a motorcycle over 200kg is supported on just two center stand feet. Without these ribs, even this thick steel plate would bend.
Locking is simple. Just move it to the left
Moving the bar to the left lifts the wheels and locks it in place. It’s a very simple mechanism, but it’s very important.
The nuts aren’t tightened. You’ll need a thin 17mm wrench
Don’t use this type of product right away without checking… “Cheap = Your responsibility” is the safest approach.
You’ll need a thin 17mm wrench to lock the caster wheels. I’m guessing most people probably don’t have one… but what do you do?
The front stays on the ground; it takes some technique
Since the front is on the ground, moving it even slightly requires technique. Basically, “Be careful when moving it forward in the direction the stand might come off.”
“It won’t work if the ground is uneven!”
Now you can park flush against both the wall and the tail
For center stand-equipped bikes where you want to get it a bit closer, this is a really great product. Being able to buy something like this for under 7,000 yen (including shipping) is absolutely amazing.
I just learned about this product a few days ago, but apparently it’s been around for quite a while… The premium Wunderlich version costs 57,200 yen.
At 7,000 yen, you could buy eight of them… or not! With products like this, the design concept takes up a large portion of the cost.
I was so impressed that I ordered two more.
If you want to park your center stand motorcycle flush against the wall, this is a must-see item.
I’ll say it again: “It must be an offset design” or it won’t work properly, so please be careful.
These offset designs are surprisingly rare. Based on inventory levels, I suspect they’ll sell out pretty quickly. I’ve already ordered two more, so I’m feeling secure (*´ω｀*)
Garage Hacks: Sliding Motorcycles Sideways with the “Center Stand Mover”!
Topic: Maximizing garage space by utilizing a high-weight capacity center stand dolly. Details: Maximizing space is a perpetual challenge for any motorcycle garage or factory. Trying to park a heavy bike perfectly flush against the wall usually requires exhausting back-and-forth maneuvering. To solve this, I introduced a highly popular, frequently sold-out item: the Center Stand Mover (Motorcycle Dolly) . By simply popping the bike up on its center stand directly onto this heavy-duty steel caster plate, you can effortlessly glide the machine 360 degrees in any direction. Verdict: It allows you to slide a 200kg+ motorcycle completely sideways, parking it with just centimeters of clearance against the wall (“Bita-yose”). It eliminates dead space, clears up the center of the workshop for actual wrenching, and transforms garage efficiency. If you find one in stock, grab it immediately!
ポチップ
