



This is an unusual separate-circuit mini fuse box used on Honda scooters and similar machines.
Usually it’s built into the main harness, right?


Roughly, it measures 48 × 29 mm.

Since it’s a repurposed base, the connectors from the 250 (4-circuit) and 110 (6-circuit) can be reused as-is or reconfigured.

The terminals come out easily.
Watch out—there are single and twin types.

It’s held in place by just the center lock,
so you can release it with even a thin flathead screwdriver.

Here’s what it looks like when you take it apart.
Once you see it, the difference between single and twin types is easy to understand.
If you want 3 circuits, just bypass the single and twin with wiring.
Terminals are available from wire suppliers.
● Sumitomo Wiring Systems mini flat fuse F-terminal, dual type
(for 3.0–5.0 mm² wire) / F-FUSE-1234
● Yazaki mini blade fuse F-terminal / F-FUSE-MN-8851


P-TOUCH 24 mm width tape for printing.
Since 24 mm is a bit wide, trim it to size with scissors as needed.


The standard fuse box mounting method uses a claw lock.
Since making that shape is a hassle, I cut it with nippers, finish it with a belt sander, and secure the bracket with Megmix.
