

In a way, it’s a rare OEM part.
The wiring connector is 250-type and non-waterproof, with no special terminal shape.
It’s something used on older bikes.
*Such as the ZZR1100.

Choose a starter relay with a 30A fuse.
Having a 30A fuse as close as possible to the battery makes a huge difference in safety.
By the way, without this 30A fuse,
the section from the battery to the fuse box is unprotected.
If the battery positive wire shorts out, current keeps flowing until the battery is drained—which means there’s a high chance of fire.
Especially on older motorcycles, the starter relay doesn’t have
this fuse, so adapting one like this really boosts your safety margin.
250-type terminals:
upper left and right are ground and starter ON 12V.
Lower left and right are constant 12V (battery +),
which can supply power to the main harness, D-UNIT, or direct-battery relays.
Just using a starter relay like this raises safety and makes it much easier to tap constant power for direct-battery wiring—your battery terminal stays clean.

The terminals are a standard ring-lug size (M6).
This is really important, because nowadays many relays have narrow, oddly shaped terminals or stoppers to prevent rotation—they’re all special.
A model that accepts common off-the-shelf terminals is extremely rare.
Kawasaki OEM part | Starter relay with 30A fuse, 250 coupler damper fixed | ¥10,430 | 27010-0796

You can find things like this on Amazon, but since this is a “super critical spot”…
