900%
A world of personal satisfaction
This time it should be 3 times thicker
*Compared to our standard
Basically, I
like things that look “stock-ish”
At first glance,
I prefer a world where you can’t tell
Customization (modifications) is
how you express your individuality
maybe that’s what matters.
Guide Rear Brake Hose
61196-38G01
Parts used on Bandit 1200K6 and similar models
Plastic with good sliding properties
“C-shaped” so hose attachment/detachment is easy
Comes with anti-rotation pin
120 yen(*´ω｀*)Yay!
Zag it
and make it flush!
Be careful about grip when zagging
Small things add up
You’ll notice the effect around round 6 or so
A somewhat unusual stand hook
JB-POWER Racing Stand Hook STD Swing Arm Type
670-104-001
Can be used on standard swing arms too
A handy item
ポチップ
Pay attention to the distance relationship and bottom shape.
The swing arm weld boss surface is
flushclose to that
The bottom surface isflatBe careful so you don’t waste money
buying something that won’t work
Pay attention to the distance from the caliper
Can the axle be removed?
Can the fluid be changed?
With our stand, this position is the limit.
Ideally, the front side would be better.
J-TIRP
Durable V-plate receiver can be used
This receiver is easy to attach, period
Reduces the possibility of
scratching the swing arm
Durable V-plate receiver (2 pieces)
φ60【JT-R107X】
ポチップ
When attached, it looks like this
It’s flush, so it looks really good
I wish everything had this shape
It’s that good.
Use it for pivot shaft conversion!
ポチップ
No image of the U-shaped boss…
Properly welded and
fixed to the swing arm.
Due to the torque rod,
weight reduction?
With the boss welded and the support side
being large, it might be a wash
So subtle that
nobody notices…
The banjo bolt pitch changes
from 1.00 to 1.25.
And that’s how it’s done.
I really should change the chain soon~
