They changed the water temperature gauge to numbers.
Well, that’s pretty niche!
Searching for parts is fun!
That’s one of the joys of working on bikes too! ♪
Now that the painting and OH are done,
I’m putting it back together.
It’s taking quite a bit of time (and money).
Speed wire gets lubricated at times like this
A part I want to keep using if it works
Fuel tank damper replacement
Hmm… it’s dirty…
When in doubt, just do it!
I applied gun coat and baked it.
The meter harness is dirty, so
I’m going to clean it up (*´ω｀*)
I peel it off and completely degrease it
Scrubbing with a cloth…
It comes together nicely like this.
The materials these days are really excellent
“Can be installed later, stretchable, resistant to rubbing”
For those who love using harness tape or gel tubing,
please
try this at least once.
Wrapping harness tape is a pain.
Electro tap
If you’re never going to remove it again, maybe…
Basically, it’s a material you shouldn’t use
In the first place,
including this in the package is problematic…
When you remove it like this,
“continuity”
To remove and repair it,
you need to pull the terminals out of the connector
Tape is already weak for this
3:1 ratio or something like that
shrink it
Sumi Tube F(Z) isn’t sufficient
Electrical work probably isn’t just okay,
you need to make sure it’s “definitely okay”
or
bikes are scary.
I also secured the limiter cut properly.
ポチップ
ポチップ
