One problem solved, another one appears.
When I got the fairing in a good position, the stem made contact with the fairing bracket even more…
This is the reason for replacing the upper and lower stem….
I did my best for now…
I kept the base and bypassed everything before cutting. I’ll cut it later.
The lower side is a damper, so it should be fine…
I’d like to raise it a bit more, but considering the headlight adjustment range, this is the limit.
If it weren’t for the lateral damper, it would contact perfectly.
Replacing the stem is the way to go… really.
The headlight adjustment is gone, so I need to rebuild it….
To be continued…
