The GS1000S looking stock is nice~
PAMS MOSFET regulator. Since it’s large, we needed to modify the mounting.
We tried to keep things as simple as possible…
We made about three of these
Now it’s just a matter of installing them.
We confirmed it charges up to around 13.6V.
They asked us to measure the compression in each cylinder. There’s some variation, but it’s still fine.
Polishing it nicely feels great.
We also replaced the filter.
We replaced all the meter valves.
We also re-synchronized the carburetors
Fluid change and we’re done.
Running great~
