Inspection, Deco-mainte, and Newtech oil change, among other services.
The front and rear wheel bearings were replaced previously, so they’re in excellent condition.
The dampers are also in good shape.
The front calipers are covered in dust, but they’re still functioning without issues.
The rear calipers have quite a bit of dust too, but they’re in good condition.
The fluid was clean.
The lever grease had deteriorated somewhat.
The pedal uses sealed bearings, which I disassembled and inspected.
The side stand is well-lubricated, so it shows minimal wear—that’s good.
The throttle has good lubrication and is working well.
The spark plugs are still good, so we’ll leave them as is.
The air filter was quite dirty.
There’s a vacuum port available, but this setup offers better convenience. No adjustment was needed.
Oil change to Newtech NC50 10W-50
I also replaced that particular part we discussed.
After a test ride, we’ll be done.
