Blog

Yoshimura Mechanical EX → Fire Spec treatment Wow, this polishing is quite demanding, isn't it? I wonder if it's all done by hand? It's used, but it looks br...

Let's do some brake maintenance. Hot water is really convenient—it dries quickly and cleans dirt well. Since it's an anodized aluminum caliper, there's no co...

Today we'll assemble the rear section. Refreshing the rear assembly. We've replaced the bearings and sealed them with NC100. We'll replace the damper and whe...

This is a Bandit 1200 K6 that recently passed inspection. We'll replace the fluid and air filter. We replaced all the fluid. Air filter replacement as well. ...

The Z's drain bolt has a larger outer diameter compared to newer ones, and even if some small foreign matter remains in the threads, the drain won't tighten ...

You can get great results by adding just 1 liter of NC41/40 as an additive to the usual NC50. Shooting the bike from a low angle makes it look surprisingly t...

Let's continue from yesterday. Since it was assembled yesterday, let's go ahead and install it right away. It's really out of sync. The synchronization adjus...

I had some business picking up parts, so I stopped by on the way back. Sorry for pestering you with visits day after day.   Still a prototype, but they'...

Let's perform carburettor maintenance. This time we'll work on it as an assembly. There's light rust throughout, but it's fine enough that we'll leave it as ...

Today we did an oil change. Since we couldn't move the bike further back, we worked near the entrance. The bike is so black that the dust really shows up on it…