Bandit– tag –

We check the condition of the wheel bearings and steering. When should wheel bearings be replaced? I don't think you'd be out of line replacing them at 20,00...

Oil was starting to leak from the shift shaft, which is a common issue, so let's replace it.   It was dripping so much that little drops were accumulati...

We'll perform the self-point maintenance you requested. Levers, pedals, and other controls feel great when they move smoothly. To achieve that, we first clea...

Inspection day means an early start and I'm a bit drowsy. The outside temperature is rising quite a bit today, so it's warm out there. Both safety and reliab...

Trusted Higashi-Nichi. Let's check the tightening torque with the DB50N. A torque wrench is also a measuring instrument, so calibration is necessary. I own a...

Brake caliper maintenance + aluminum piston conversion We inspect the seals with extra care. You might ask if it's really necessary, but... it's for that ext...

Brake caliper maintenance + aluminum piston conversion I'd say most customers' calipers don't come in surprisingly bad condition. No major rust—it looks good...

This is a Bandit 1200K5, the only one with a black frame in the cat's-eye series. We have a request for Bandit 1200K6 brake caliper maintenance + aluminum pi...

We'll get the inspection prep underway. Let's adjust the headlight ★ Without a headlight tester, you really can't get the job done. The number of bikes comin...

Man, it's really cold! It's a bone-chilling cold. Really! I'm not feeling motivated.    A really nice Bandit 1200 K6. It hasn't been ridden for a w...