Carburetor OH– tag –

Work unexpectedly stalled and before I knew it, we were at the end of August. Plans are uncertain—parts availability turned out to be trickier than expected....

Thank you for your patience! The choke wire (discontinued) has arrived and we're all done! (*^-^*) We'll change the engine oil and filter. We use Shell Advan...

Let's move on to the remaining finishing touches. This gold metal engine guard is actually a tricky one. I suspect most people don't even notice it. A bolt, ...

We'll assemble it with reliable SKF oil seals. We checked the inner tube runout. No issues found. Today's troublemaker. Applying too much thread locker to cy...

The work over the weekend just doesn't progress at all... I'll just get the prep work done (^_-)-☆ I cleaned, lubricated and adjusted the stem bearing. It's ...

Yesterday's leftover? No, it's a post I forgot to upload. I'll continue with the oil-cooled maintenance. I replaced the air filter. I replaced the engine dam...

Since it's the weekend, work has been a bit slow... But I got a lot done while the customers were between visits (^_-)-☆ With the remote attached, it looks l...

It feels like spring, and we've got a lot of inspections coming in. Well, it's the usual thing every year, but maybe it's a bit better since we're restrictin...

It looks like it's going to rain tomorrow too, so let's skip the inspection prep and get the carburetor assembled instead. We do a light cleaning with baking...

The removed carburetor has been sitting idle. First, let me get everything organized (*^-^*) There's a bit of powder rust here. For now, I've disassembled it...