Main Harness Replacement– tag –

With that, we've completed everything, and after the inspection and oil change, we'll take it for a test ride to finish up. Using a welding rod as a guide, w...

We performed additional work: Brembo radial master cylinder and brake hose fabrication. The TEE-FIT is indeed bolted down nicely and looks clean. First, we c...

The bearings arrived, so let's swap them in. It's a simple one made from scrap material, but once you build it, you can use it again in the future. Of course...

I thought it over from various angles and decided to make the heel guard bigger. I want to stand the ribs up, but there are few places where I can secure it,...

The cord was inserted into the coil. It's a slightly unusual layout, but the serviceability should be better. The cap is oriented toward the coil side. It's ...

Let's install the Watanabe SP2. The included bracket makes removal difficult. We don't take it off often, but it gets in the way surprisingly when we remove ...

We didn't forget the work. The sub-harness just never arrived from the supplier. We peeled away what we could and then wiped it clean. There's quite a bit of...

Sunstar Premium Disk & RMZ Pad Service KIT was also requested. Depending on the caliper, T=5.5mm can be used, so please definitely consider it. The weath...

ETC antenna mounting can be tricky. The combination of a round rod and a flat plate is really versatile and works great. Angle adjustment during welding is e...

Let's continue from where we left off.   We're using a Daytona headlight relay. It's low-priced so the feel is what you'd expect, but the advantage is t...