Old Blog– tag –

It's still a temporary setup, but this is the first job for the "Super X". The bed is a bit higher than the Sanicab, so there's a little nervousness, but you...

So this is the second job of the morning. I thought there was absolutely no way we'd make it… There's also an address change to handle, so let me head over e...

Super X makes its first run with two bikes!! I hadn't prepared the bed at all, so the tie-down position was bad and it took time—I was so bummed out… But &nb...

The bed modification still isn't finished, but we're accepting inspections all the time. Tomorrow I want to try the long-awaited two-bike haul with three bik...

Here's a GSX-R1100N that came in first thing this morning.    NUTEC (mid grade) and filter The customer wanted carburettor synchronization, and thi...

GSF1200 oil change.     Backlighting and the tight shop space make it look like this. NUTEC (mid grade) and oil filter—all set! ★

Utchi's giant camera 8×10!! We were asked to fit the shop interior and the bikes in the frame   We moved the bikes inside the shop to make space&nb...

Ucchi brought back some delicious sweets from Quatre Quarts for us!   The sweetness of fresh fruit and the tartness of yogurt come together perfect...

And then the fork oil change!    Right side oozing out    The fork oil was quite clean ★   The inner tube is looking a bit tire...

Next up is front maintenance.     From a low angle     I tried to pry off the bottom with a screwdriver and broke off the outer race ★ Bu...