Rear Maint + OH– tag –

Well, hello there! Today we're going to do some rear maintenance. Let's take off the Pokidam. The monoshock is inconvenient to clean and has become a nest of...

Let's disassemble the front fork. It's looking quite sharp. There's quite a lot of rust. If it keeps building up like this, it'll need to be replaced. There'...

No matter how much you protect and cover things, the worries never end…let's replace the disc and wheel bearings. It's looking pretty solid—the oil is holdin...

Time really flies—let's get started on the front end work. There's plenty of oil, but it was pretty gritty. The lower seal is bent and showing some friction....

from Mie Front/Rear Maintenance OH・Sunstar Campaign Disc・Oil-Cooled Maintenance・Wheel Bearing Maintenance・Flat-Rate Motorcycle Inspection・New Tech reque...

We'll complete the remaining work on the temperature meter installation. Both the engine and oil cooler lines get very hot, so we want to avoid direct bundli...

We'll be installing a Yoshimura multi-temp meter, so let's remove the upper cowl.   Yoshimura multi-temp meter. Sometimes you do get concerned about oil...

Let's fabricate an adapter to replace the rear suspension for now. We're using the milling machine like a pipe notcher. I rushed the welding and it's not qui...

We remove the old bearings using a puller and hydraulic press. New parts. We forgot to order bolts and nuts, so today we'll progress as far as we can. Making...

Phew, what a relief—it came off much more smoothly than expected ★ This era was well-lubricated, which really helped. It's looking a bit dull, so let's give ...