Swing Arm OH– tag –
-
[Bandit 1200 K6] Total Refresh of the Final Oil-Cooled Model’s Footwork! Thorough Overhaul from Stem to Linkage
What's the Bandit 1200 really like? It's a good bike. In oil-cooled history, it's possibly the first—the same name and engine continued for six years of sale... -
[Bandit 1200 K6] Refreshing the suspension on the final oil-cooled model! Complete overhaul of the swingarm and linkage area.
Lately I've been practicing and uploading almost daily to revive my YouTube channel. The efficiency of filming and editing has improved significantly, and I'... -
[Unicorn GSX1200S] Swingarm OH & Rear Caliper OH Complete. Restoring “Pristine Motion” with New Bearings and Seals
I pulled out a secret stashed swingarm and started overhauling it (*´ω｀*)There are people who haven't looked at it once since purchasing it... it probably w... -
[Unicorn GSX1200S] Refreshing the suspension on the oil-cooled Katana. Proceeding with both “Swingarm Overhaul” and “Rear Caliper Overhaul” simultaneously
Unicorn JAPAN-made GSX1200S has received a lot of requests from all the way in Izu. With plenty of time available, I'd like to proceed with the work at a ste... -
GSX1200S Inazuma 1200 Oil-cooled Katana oil-cooled maintenance + Yoshimura ST-1 cam installation swing arm overhaul stem bearing replacement inspection
Today we obtained the inspection certificate, so we've installed the fairings and completed the test ride too ('ω')ノ We said the synchronization was fine, b... -
GSX1200S Inazuma 1200 oil-cooled Katana oil-cooled maintenance + Yoshimura ST-1 cam installation swing arm OH stem bearing replacement inspection
Let's replace the stem bearings. We're always working hard to make sure the job can proceed without any tricks ('ω')ノ Humans are constantly heading down the... -
GSX1200S Inazuma 1200 Oil-cooled Katana – Oil-cooled maintenance + Yoshimura ST-1 cam installation, swingarm OH, stem bearing replacement, inspection
Here's the work we're doing ('ω')ノ (these are photos after the work...) Let's overhaul the swingarm! When removing the wheel, wrapping this warmer cover aro... -
GSX1200S Inazuma 1200 oil-cooled Katana oil-cooled maintenance + Yoshimura ST-1 cam installation swing arm overhaul stem bearing replacement inspection
Non-Unicorn GSX1200S Inazuma 1200 oil-cooled Katana—this is the first time I've laid eyes on one. It's been built nicely, using original parts as much as pos...
1