Vehicle Inspection– tag –

Let's replace the integrated master cylinder. If we don't move the plate outward, it will contact the swingarm, so we use a plate instead of a spacer. Parts ...

That glossy finish is real paint We swapped them out for the Dunlop tires you specified. We replaced the front side first. I forgot to snap a photo of the en...

Let's freshen it up with Nishimura Coating. The coating has good thickness, so it becomes smooth. Since we have to remove all the bearings and such, addition...

Incredible craftsmanship. A chain-pulling caliper support—what a surprise. I wonder if it's an issue with the sprocket we purchased. Our milling machine is a...

The fresh green is dazzling. Apologies for the simplistic design. Since removing the seat is a hassle, please access it from the side cover instead. The ante...

A beautiful Z1000R-2. We'll work on it step by step. The owner was concerned about leaks, but there don't seem to be any particular issues. This might be wha...

If vacuum cannot be obtained, we confirm synchronization with this gauge. The pedal has shielded bearings, so we just cleaned it and applied a light coat of ...

Bandit 1200 K6 Flat-Rate Motorcycle Inspection Deco-mainte NewTec Oil Change request. We remove the front and rear wheels and check them. It's good to clean ...

The bike was in beautiful condition, so we proceeded with meticulous care. We checked the condition of the steering stem. It had been disassembled not long a...

CB1100 SC65 A recently fascinating air-cooled 18-inch bike infused with 21st-century technology. The lever area is well lubricated and in reassuring conditio...