Well, well
Lately it seems like Tama-chan has been getting all the attention.
Race ring press-fit complete ★
You don’t have to check every little thing, but since I’m a worrier, I can sleep easy as long as I have a visual inspection and photos.
I wiped up the overflow on the side ★
Both top and bottom seals are working exceptionally well, so the movement should be smooth with a little nose oil.
Here it is—the fork cap is 41 mm ★
Some special tool happened to be 41 mm—we’re good!
Looks like it shifted a bit.
It’s supposed to sit on that flange. I found it and took a photo.
Pulling it out once and now I’ll disassemble it.
Hoo-hoo
