Inazuma 1200, almost completely stock. In a way, it’s a mature setup.
First, we fabricate a bracket to secure the TEE FIT. There was a gap, so we added a burl to it.
This is how it gets secured.
We try this and that, fitting the actual parts to determine the layout and length, then fabricate accordingly.
The STD is a side neck. Another tight layout to work with…
And it’s done.
We’ve wrapped it in mesh, so it’s somewhat resistant to rubbing. Maybe a touch more upscale looking.
When the center stand won’t fit, it gets pretty tedious. We try our best to keep things out of the work flow.
A banjo single short—not many people use this type. It’s short, so it’s practical, but it has thickness in the width.
When you can lay things out cleanly, hoses and wires follow a gentle, untwisted radius. Very natural looking.
We’ve twisted it slightly and routed it outward. Caliper removal and fluid changes are easy.
After bleeding the air, the feel became solid.
More to come!
