(STRAIGHT) Pilot Bearing Puller Set 8–35 mm 19-8000
I really love cheap bearing pullers.
The reason is because you can hammer them (*^-^*)
When you get to the Hazet level, the feeling of “No way! Absolutely not! Power play” gets stronger.
But with the cheap ones, you can go “Alright! Bang bang!” and work quickly…
I haven’t used it yet, but if this kind of thing catches on, the size range is probably a sure bet.
Wait—8 to 35 mm is an insane tolerance range…
And it even covers the 22 mm that Yamaha loves… That’s incredible…
It looks like it could come in handy when caliper pistons won’t come out either.
If the inner diameter matches, it works on ball and needle roller bearings too.
People often think only ball bearings work, but it works on needle rollers too.
*Length can be an issue, so be careful
Most of the frame bearings you encounter on motorcycles should be doable, right?
*Except the steering stem
Jaws are also available separately
That’s really nice.
Sometimes the jaws get damaged from aggressive use, so having them available separately makes recovery easier. *Though it doesn’t seem to be for all sizes…
If you don’t overdo it, the puller won’t break
Pullers break when you use them in ways that are almost impossible.
If tightening the screw doesn’t budge anything, you should stop and think.
At that point, the puller’s force probably can’t handle the situation.
I was torn between Hazet and Kukko at first, but gave up due to price and delivery time.
But at this price with this range, I really think it’s a godly setup…
Straight is not to be underestimated…
