Well, I touched it again after a long time (about 1 hour)
Finally, the handlebar post arrived
The Zephyr has 2 holes, which is a bit niche
I chose Antlion 03025-SL
This should give me my preferred position
ポチップ
Finally I can remove this part (‘Д’)
To install the Hyperpro initial adjuster, it would interfere
so I need to move it forward of the handlebar.
I wantedAntlion 03025-SL
from the start, but the delivery time was long
This Amazon
offset handlebar adapter is just temporary (‘Д’)
Well, for now
it’s an item without spending money
The workmanship is quite sharp
so it’s good to just temporarily test the position
Anyway, the Zephyr 400/550
has the handlebar set back and low.
I prefer handlebar position with some play in the elbows
High freedom should make it more fun to ride.
Is 2-hole the standard for Kawasaki?
Well, it does keep the handlebar position firmly fixed
which is nice.
What I always think about is the included bolts
SUS304 bolts come with everything
Unless there’s a specific reason, I don’t really like them
so I replace them with steel ones.
Steel has better tightening feel and
is easier to deal with in case of emergency.
Finally I could remove that weird adapter
and it’s nice and simple now.
Perfect, the initial adjuster is also
avoided and the position should be nice and easy~
supposedly
When I ordered this kind of part, I thought
it’s surprisingly hard to get these days
“Buy it while you can!”
That’s the golden rule (‘Д’)
ポチップ
