Oil-cooled Inazuma 1200 inspection: Yoshimura ST-1 cam, rear disc 220φ conversion, aluminum torque rod, swingarm OH, exhaust repaint

The pivot shaft won’t budge—it’s the worst I’ve seen.
There’s only so much you can do with a hammer, and there’s a high risk of damaging the inside of the frame.

“No way! Absolutely not! Brute force!” is our motto, so we’re working gently.

Wednesday is “MK2 day,” but… I’m unsure.

I can’t shake the feeling that something’s not right.
Nothing moves forward until I get the shaft out.
Extracting the shaft is definitely a lot of work, so I’ll push ahead when nobody’s around.

I’m making a center-hole drill jig number 12 for the shaft.
This time I’m expanding it to 9 mm, so I made it in two pieces.
I sized the outer diameter to fit snugly in the pivot hole.

The photo shows we’ve made good progress, but expanding by 0.5 mm at a time is making me dizzy…

Expanding the drill jig center boss each time

By inserting it as deep as possible, it shouldn’t wobble (fingers crossed).
Flush as possible, wobble-free as possible.

If I cut corners here, I’ll probably—definitely—regret it.
I’m going to take my time and do this right so I can get it out for sure this time.

Cutting threads at M10-P1.00

I want to cut the threads as straight as possible, so I’m using a nut to keep them reasonably straight.
The open space really helped (*´ω`*).

Once the threads formed, it started to look right.
I won’t use it once the shaft is out, but…

Setup is done and I’m excited.
Now I’ll machine another collar.

First pass: no stress on the pivot

I’m stepping the collar so it doesn’t stress the pivot.
Basically, I made sure it won’t tilt at all.

Crack! Snap! Scary!

The head came out! That’s hydraulics for you.

With hydraulics, if you rush the process, things get worse, so be careful.


A hydraulic punch is handy when you need it.

The result: “pulling force,” but basically it’s “pushing.”

The center where the shaft sits is fixed, and the piston extends from around it, so you get “pulling force.”
Pretty cool, right?

It’s also excellent for drilling holes in sheet metal (*´ω`*).

Phew—at least that worked—victory is assured… So glad—so glad—
I’m curious to see how rusty the shaft and collar are.

The article was not found.

  • Copied the URL !