KITACO | X-ADX(RH21) | 756-9000100 | Power harness for relay trigger

KITACO | X-ADX(RH21) | 756-9000100 | Power harness for relay trigger
Used on the X-ADV(RH21) by adapting from another model.
The location is a blind connector on the rear of the left rear cowl, and it plugs in there.

Just a heads-up though.
Plugging it in gives you access to ON 12V / constant 12V / ground, but here’s the thing:
the wiring is thin—looks like 0.5 sq mm or smaller—so drawing power from here is a no-go.
If you plug a power-supply relay like a D-UNIT straight in and try to use it, you’ll run into serious trouble, so be careful.

I use it just to draw ON 12V to trigger the D-UNIT relay.
* The advantage is you can proceed without modifying the bike’s wiring.

KITACO | X-ADX(RH21) | 756-9000100 | Power harness for relay trigger

Inside the black boot is a blind connector.
Just remove the blind cover and plug it in.
I think this part was originally meant to be spliced in.
Well, it’s an adaptation anyway.

KITACO | X-ADX(RH21) | 756-9000100 | Power harness for relay trigger

  • Copied the URL !