Oil-cooled: how long can you ride? GSX1200S inspection master OH sprocket and handlebar post replacement

Oil-cooled: how long can you ride?
I think it depends on how often you use it and what condition it’s in right now.

Basically, there are a lot of discontinued parts, the supply of OEM parts has gotten expensive, there are few used parts available, and there’s almost no reproduction parts.
As long as nothing fundamentally breaks down badly, there shouldn’t be a problem.
But nobody knows what will break tomorrow.
If something fails and no new part is available, you just have to fix it or find a workaround somehow.

It’s not like the old days when you could just look at a parts list, order the part, swap it in and be done.

You have to manage things carefully by finding information about adapting parts from other bikes and doing metalwork to make it all work.
If you’re going to keep riding it, it’s become the kind of bike you have to treat with deep affection.

The drive sprocket lock nut is 1,500 yen.

Normally we’d have about ten of these in stock at the shop.
The stock just ran out, so I went to get a quote to order some yesterday and…

27521-48E00 — what? 1,500 yen?
Oil-cooled 09159-20004 is 470 yen???

I wonder if something changed… I’d never really paid attention to it.

For now we’ll swap the front sprocket and put the cover back on.

Replacing the handlebar post

The owner wanted a slightly more comfortable riding position, so they asked for the replacement.
The cables and hoses had plenty of slack, so we got it swapped in without any trouble.

Overhauling a stiff brake master cylinder

It’s been a while since we’ve seen number one on the list of motorcycles too scary to ride.
When you squeeze the brake lever hard, it gets stiff and grinds with a grinding sound.

The brakes engage in two stages, so it’s really hard to modulate and scary to ride.

I use a nylon brush in a drill to clean the inside thoroughly.
It’s a good idea to make sure you can trace the return port passages with a fine drill bit to be safe.

The brake master cylinder cup has swollen and the seal has closed up.
Even in this state, Japanese-made products don’t seep or leak, and I really have to admire that.

After a few years they all end up like this, so it’s a good idea to overhaul them when the time comes.

It’s one of those hole positions that feels a bit off for no clear reason.
I have no idea why it ended up like this.

The parts came in unexpectedly today, so we knocked it out quick.
We’ll get it inspected next week and it’ll be done.

ヨシムラ(YOSHIMURA)
¥12,620 (2026/09/21 02:00時点 | Amazon調べ)
\4x Rakuten Points Sale!/
Rakuten
\4x Rakuten Points Sale!/
Rakuten

The article was not found.

  • Copied the URL !