No way…
I see them all over the streets
The Rebel is just as common,
but the Z900RS has been around for so long…
You see them constantly for years.
This is it! An explosive hit bike
Where did the “KATANA” go?
Since we’ve kept you waiting for over half a year,
we’re moving right along~
FI naked models are tight on space
Installing the D-UNIT is a bit…
tricky…
They brought various items.
The reliable GH10 grip heater
Slim and sleek USB 2-port
D-UNIT (plain)
Let’s start with the areas we can work on first.
Got it squeezed in just barely
Now we can get power in a clean, factory-like way.
We’ll handle the wiring later.
ポチップ
Grip heater
If you’re unsure, go with the GH10!
It’s the standard choice
The ease of installation is unbeatable!
It’s probably the cleanest way to install it,
isn’t it?
The length comes in 120/130MM
Pay attention!
Most are 120MM.
The throttle side is integrated
= it doesn’t rotate together easily
Previous grip heaters
were designed for versatility,
so they typically mounted on existing throttles.
This causes
“thick outer diameter” and “heat causes rotation”
problems.
On the flip side, they’re cheaper,
but for a hobby bike,
it’s worth weighing
usage frequency against future frustration.
It has the same outer diameter as a regular grip
You might think “wow,” but…
since it generates heat, it feels “harder”
meaning the grip feel is firmer.
For those who hate vibration,
this might be a concern.
The winding diameter is 36.~φ
We’ll use this.
Mark the position with tape so it stays nice.
Even if it shifts during removal, you can reset it (*´ω｀*)
Plus,
you can adjust the position freely with each notch
What I’m getting at is…
“you won’t mess up the wiring layout”
With the type that goes inside existing throttles,
“it’s one shot!”
For first-time grip heater users,
the failure rate is pretty high…
Modern bikes don’t lock the throttle when it’s off.
And it’s fixed with M5 bolts…
This throttle holder
looks a lot like a Yoshimura product.
Our shop’s work unit
D-UNIT+ connected
We’ll heat this up and insert the left side!
Exactly! Fast heating!
Maybe I’m exaggerating a bit,
but you can feel it warming up at an impressive speed
Clean installation
The ease of installation and clean appearance
are unbeatable ♪
If you want a grip heater, this is definitely the one
Since I basically don’t glue it,
removal is easy too.
ポチップ
