Bandit 1200K6 Carburettor maintenance OH Deco-mainte

Now that I think about it, last week it rained every day except Monday and Tuesday.
Good thing I got everything done on Monday (*´ω`*)

Today was a day of bikes coming and going, drop-offs, and deliveries.
Let me make a little progress on the Deco-mainte.

The tires are from 2019, so they’re fine.
Looking at the customer’s tires helps me get a sense of recent trends.

The disc thickness is no problem.

Maintenance that makes you go “oh!” is really important. (‘ω’)ノ

I cleaned and lubricated the drive chain and also cleaned up the chain case.

I cleaned and lubricated the left and right levers.

The clutch boot was torn, so I replaced it.
This part has very high compatibility, so it’s good for bike shops to stock it (*´ω`*)

The carburettor is off, so let me replace the throttle cable and choke cable.

I cleaned the throttle sleeve and applied a light coat of lubricant.
The left bar end is missing. The right one was installed incorrectly, so I fixed it.

I disassembled, cleaned, and lubricated the side stand.

I replaced all the fuses except the power fuse.
Checking them occasionally gives you extra peace of mind.
That’s all for today~ ( *´艸`)

  • Copied the URL !